Tri Star and Load Equilizer Turn Signal to Brake Light Conversion Module
TRI-STAR:
The Tri-Star module converts the rear turn signal lights to function as brake and turn signal lights. When the brakes are applies, the turn signal lights illuminate. If a turn signal is applied, it has priority over the brake light function on the side that is selected. If the turn signal is canceled and the brakes are still applied, the brake light function of the turn signal lights illuminate steady on.

NOTE:
If your bike does not have a variable load turn signal flasher, a Dual Load Equalizer will be needed for this installation.

Tri-Star Features:
•Adds brake light function to existing turn signals
•Dependable Solid-state electronic components.
•Weather Proof – potted with soft cell technology to prevent wire chaffing and damage.

Tri-Star Specification:
•Voltage: 12 VDC Switched,
Negative Ground.
•Max Load Capacity: 6 amps per left or right channel.
•Dimension: 2 1/4” L x 1 5/8” W x 5/8” H
•Mounting: Secure to flat surface with double sided VHB tape (included).

Tri-Star Function Check

Applying the brakes will cause the rear Turn Signals to light as long as the brakes are held. If a turn signal is sent to the rear lights at the same time it will have priority over the brake lights and cause the corresponding light to flash. When the turn signal is canceled the brake light will resume.

DUAL LOAD EQUALIZER INCLUDED IN THIS KIT:
This Dual-Load Equalizer is designed to fix the problem when you have changed your stock directionals to L.E.D. turn signals and they flash quickly or not at all.

NOTE:
If your bike does not have a variable load turn signal flasher, a Dual Load Equalizer will be needed for this installation.

Dual-Load Equalizers Features:
•Dependable Solid-state electronic components.
•Weather Proof – potted with soft cell technology to prevent wire chaffing and damage.

Dual-Load Equalizer Specifications:
•Dimension: 2 1/4” L x 1 5/8” W x 5/8” H
•Mounting: It is recommended that the module be mounted in a location not subject to extreme heat conditions.
•Secure to flat surface with double-sided VHB tape.
TRI STAR AND DUAL LOAD EQUALIZER BOTH INCLUDED IN THIS KIT.

Tri Star and Load Equilizer Turn Signal to Brake Light Conversion Module Fits: VICTORY MOTORCYCLES UP TO 2007 (WILL NOT FIT 2008 AND NEWER). Vegas, Victory 8ball, Victory 8 Ball, Victory 8-Ball, Victory Jackpot, Victory Hammer, Victory Kingpin, Victory Cross Country, Victory Vision, Victory V92C, Classic, Victory V92SC, Victory Sport Cruiser, Victory V92TC, Victory Touring Cruiser, Victory Judge, Victory High Ball, Victory Hard Ball, Victory Cross Roads, Victory Boardwalk

Victory Only Motorcycle carries the largest stock of performance mods, upgrades, custom equipment gear, apparel, OEM replacement and aftermarket parts and accessories for Victory Motorcycles with international worldwide shipping to Canada, UK, CZ, GB, Australia and anywhere a Vicory Motorcycle rider wants to do it yourself customizing of a show quality bike. If you are looking for Chrome or Black Contrast Cut billet aluminum accessories. Just shop Victory Only and Owens Cycle Works website for retail purchases or dealer wholesale orders for Victory’s parts.